When we think of washers, one thing comes to mind – our fresh-smelling clothes. Washing machines are supposed to have a clean and comforting aroma. In fact, we expect them to be efficient and gentle on clothes while cleaning them better.
However, there are times when your washing machine is emitting a bad odour, and you might think that it’s defective. Well, we can assure you that it just needs some tender loving care. With just a few simple steps, you can eliminate the musty, mildewy, sour-scented odour from your washer.
Although you must first know why washing machine stinks and how you can prevent this from happening.
Why your washer stinks?
There are two types of washing machines, the front-loaders, and top-loaders, and it’s known that front-loaders are more efficient than its counterpart. In fact, it uses less water since its drum rotates on a horizontal axis, and the clothes tumble through the water – cleaning it more efficiently.
But most of us use various types of soaps and softeners, and this could affect the drum in the time since it might get coated with layer debris, dirt, and soap scum. If left unchecked, this could lead to bacteria, mould, and mildew.
Without proper maintenance, your washer will stink since its rubber door gasket keeps water from leaking out, so the source of the smell is trapped under the gasket, and it keeps building up until you clean it.
How to get rid of that smell
How to properly maintain your washing machine
We recommend contacting an experienced washing machine repair company like QLD Washers who can offer washing machine and dryer repairs in Brisbane. This will ensure that your washer will perform efficiently and will always be gentle on your clothes.
An electronic appliance can malfunction at any given time, and when it does, it will burn a big hole in your pocket. To avoid such a financial loss, you can follow certain tips, which you can implement before going for appliance repair.
Before fixing it yourself
Before troubleshooting the device, make sure that the appliance doesn’t come under service agreement or warranty. If it is under warranty, then find out the ways to use it. In such cases, there is no need to repair the appliance on your own. Take the appliance to the nearby service center. You ought to ensure the reimbursement for all the costs after the appliance is repaired.
Try it yourself
If the product is out of warranty, then read the guided manual and try to repair it yourself. You can’t repair the appliance without a manual. If no manual or warranty is available, the next step is to check the label if posted any below the appliance. This will help in the basic repairing an appliance.
Searching an appliance repair service company
If you are being able to repair the appliance on your own, then it is better to search for an appliance repair service company that can accomplish this task in a proper manner. The different techniques to find out the best appliance repair company in your region are:
Appliance repair services
Most of the repair companies have experienced technicians available who can repair almost all household appliances. The executives will make a call before visiting your place. If there is any major repairs required for your appliance, the executive will take the appliance along to the repair shop. Don’t forget to ask the executives about the replacement or repair policy and the services of their company before initializing the repairing task. This includes items like heaters, ovens, mixers, TV, microwave, oven fans and other kitchen appliances along with power tools. You can ask questions like whether they offer a guarantee on their work or parts and written estimate, service call charges from the repair companies.
Hopefully, the tips mentioned above will help to fix the next appliance problem. After implementing the basic tips, if the problem is still not resolved, then you can consider buying the new appliance you have been thinking of.
A TV is an essential part of everybody’s life, as without it, killing time will be a hard thing to do. TV time is also considered family time because, after a long tiring day, the entire family sits together and watch their favorite shows together.
The market is flooded with different types of televisions. Different technologies have been incorporated into TVs such as LCD, Plasma and LED, with LED TVs being the most recent one to be used in TVs compared to the other two. No matter how technologically advanced your TV is, it can malfunction at any point of time, causing a huge inconvenience to people who were about to watch their favorite content on the TV. Let’s discuss some of the most common issues in a TV.
This defect is popular in plasma televisions and its cause is because the cells burn and end up leaving marks of the scene that was previously on the screen. Normally, the defect appears when the image is displayed for an extended period of time.
Another annoying thing about this problem is when a movie smaller than the correct display size is displayed on the screen, then the edges will be visible later, hindering the reproduction of other contents. This also happens when leaving your TV on the same channel for several days; the TV logo may burn the pixels.
Dead Pixel, Hot Pixel, and Stuck Pixel
Television pixels can present a number of problems that hinder image viewing, one of the most well-known being the dead pixel. The main feature of this problem is when one pixel is erased while all others display the image normally. They often occur on televisions with LCD screens and can appear on either used or new products.
The hot pixel defect is opposite to the previous one. In this case, a small dot turns completely white on the screen. And finally, we have the stuck pixel, where a pixel has a single color, be it red, green or blue.
This defect causes an intense movement of the image and this constantly ends up in a longer delay in screen updating. It is a common defect in monitors, however, it can appear on television as well. Some situations in which this problem is perceived is when connecting the notebook via HDMI or VGA cable and even when using Xbox, PlayStation, Nintendo and other consoles on television.
You have noticed a different movement on TV when watching a video with a high amount of movement, usually when you have many people in the same picture. The image has a “ghost effect” in the background. The cause of this problem is that pixels, unlike Tearing, take a long time to display images, causing scenes to “ghost” on the screen.
Certain types of televisions have a problem identifying properly presented content. It is usually noticeable in situations where videos are cropped on the screen, i.e., images do not fit in the screen space. These are factory defects and usually cannot be corrected.
Lack of definition
This defect was common in older tube televisions, but some modern equipment may still have this defect. The problem arises when the television is forced to display content with a lower resolution than what was programmed to work by default. The lack of definition is nothing more than a certain number of cells being forced to display identical pixels, which results in more squared images.
What to do?
Now when you come across these flaws in your image you already have a sense of what it can be. It is recommended to always seek assistance with the maintenance of televisions.
Knowing what the main defects an appliance can develop can help you to identify them and, consequently, to make the most suitable repair as appropriate. For example, the fact that the microwave's internal light does not always mean a problem. This may just be the burnt-out lamp.
The most severe problems, such as unusual noises during operation, may indicate internal defects in the appliance. If you are afraid of these signs and do not feel safe to find out for yourself, do not worry. Simply call for microwave service and leave the service to the expert.
How to fix a microwave?
If you have knowledge of the device and feel qualified to repair it, you can get your hands dirty according to the five tips below. But, before that, wear antistatic and shockproof gloves to discharge the high voltage capacitor from the device, so you can make any repairs without risk.
1. Changing the fuse
Technically, the fuse is a safety device that has the function of cutting off the flow of an electric current when it is very intense. This cut is what will protect the installation from being shorted. So if your microwave isn't turning on, the first thing you should check is the fuse. If you know how to check the fuse, then that’s great, otherwise, go online to know the process of checking the fuse or take the help of experts.
2. Checking the turntable
This is another very common problem when it comes to microwave repair. After all, the turntable is one of the most defective parts of the equipment. However, before changing it, make sure that the guide is correctly aligned or if food remains attached to it, which could compromise its operation.
Performing this task is quite simple: simply remove the tray from the platform and wash normally with warm water and mild detergent. Also clean the inside of the appliance, paying particular attention to the turntable cavity and the casters into which it will fit.
Replace the tray and test the microwave. If it really is not working, there may be an internal problem with the rotary motor. In this situation, if you are unaware of the part, the best thing to do is to look for a qualified professional to assist you.
3. Replacing the power diode
Is your microwave not warming up as it should or have you noticed a strange noise while the appliance is operating? These may be signs of power diode failure. We are talking about nothing more than the electronic component through which electric current passes in one direction, while the opposite flow is blocked.
To replace it, you need to discharge the microwave capacitor and replace the defective diode with a new one. This process is quite easy and can be done without the use of even basic electrical/electronic tools. But, if you come across any issue, then consult Appliance repair experts.
4. Checking the inside of the appliance
When it comes to microwave repair, some defects are so common that people tend to ignore them. Do you know when you turn on the equipment and notice the presence of small sparks? Yeah. You must have got scared and made an impression that the problem is serious, which is not always true.
This defect may arise simply from leftover food that has remained inside the appliance and continues to cook between uses. This is also true for those splashes on the microwave walls that we sometimes forget to clean. The sparking issue can be solved by cleaning the microwave.
5. Changing the lamp
While this may not be an issue, it certainly causes inconvenience, as it prohibits you from seeing as to how much food has been cooked inside the microwave.
1. Unplug the microwave or the power box;
2. Locate the screws on the vent panel and remove them;
3. Remove the panel and identify the lighting box;
4. Remove the housing cover and replace the lamp;
5. Replace the cover and screws;
6. Reconnect the microwave to the outlet and test the appliance normally.
Hot water systems are an integral part of any bathroom because they allow people to enjoy a hot bath whenever they want. Water heaters are available in two types, tank and tankless. Where tankless hot water systems directly convert the cold water into hot and supply it via pipes, tank-type water heaters feature insulated storage tanks. When it comes to problems, then tank-type water heaters are more prone to them compared to the tankless variety.
Possible hot water system problems
Safety Tips Before You Begin
Problem 1: No hot water
There is nothing worse than taking a cold shower when you were looking forward to having a hot one instead. If you find that the water coming out from the showerhead is cold, then your water heater could be experiencing problems. You need to pay attention to some key elements in the water heater such as a pilot, thermocouple and gas control valve. Learn how to check each of these potential problems and the steps you can take to make the necessary repairs.
Problem 2: Inadequate Hot Water
What is almost as bad as a cold shower? A bath that starts hot and quickly becomes cold. If the water heater is not heating up enough water to meet the needs of your family, then there must be some issues with the water heater, such as wrong temperature settings, fault in heating elements, deposition of sediment in the tank and damaged dip tube.
Problem 3: Colored rust or bad odor
Seeing discolored water after turning on the water tap could be worrisome. Similarly, if you find the smell of rotten eggs coming from the water, then that’s the clear indication that something is wrong with the source or medium the water is coming from. These problems could arise due to corrosion of pipes or accumulation of bacteria.
The Problem: Low Rumbling or Popping Noise
If you are hearing loud and weird noises coming from the basement of your house, don't worry, it's your water heater. The sound you are hearing is most probably be of the boiling water. When there is a presence of excessive sediment at the bottom of the water tank of the water heater, then that causes the tank to overheat, which then results in boiling water. To fix this problem, you will have to get rid of sediment by washing the water heater.
The problem: water leaking around the heater base
Any kind of leak is always a nuisance. A leaky water heater can be the result of a faulty T&P (temperature and pressure) relief valve, or a leak from a nearby plumbing connection or even from the tank itself. These problems are quite easy to fix.
If you need help from a hot water system or washing machine technician in Brisbane contact us today!
The pressure switch is one of the most problematic parts of the washing machine. It is because of this frequency that it is important to know how to detect defects in this component to perform an efficient service.
Do you know the main mistakes of this piece? If not, stay tuned!
1. What is the pressure switch?
2. What are the pressure switch components?
3. The main defects of the pressure switch
4. How to tell if the electronic board is good
5. How to do the continuity test?
What is the pressure switch?
The pressure switch is responsible for identifying the water level inside the washer and sending this information to the electronic board.
As the water rises inside the tank, air pressure builds up and through this pressure; the pressure switch can measure the water level.
What are the components of the pressure switch?
The best way to fix something is by knowing its operation and each component that forms it. With this knowledge, it is much easier to detect defects and make repairs successfully.
The components of a pressure switch are:
Let's go to what matters! The main defects of the pressure switch.
Have you ever had to deal with a non-stop washing machine? This is one of the most common defects of these devices!
In such cases, it is common for the problem to be identified in the pressure switch hose. If it is bent or punctured, the part will not receive air pressure and will not be able to identify the level correctly.
Another frequently occurring defect is when the machine does not stop throwing water to centrifuge even when there is no more water in the tank. This problem may also have to do with the pressure switch.
If the airbag is clogged as a result, it may end up trapping water in the hose. With this, the pressure switch will understand as if there was still water to throw away in the tank.
Since centrifugation only starts when you receive information that there is no more water inside the machine, this process will never happen.
There is a simple tip to know if the cushion is dirty and blocked air:
Fill the washer tank with water;
And the electronics? Is it good?
The wiring is responsible for taking the information straight to the washer's electronic board. To know if it is working properly, a continuity test must be performed with the aid of the multimeter.
How to do the continuity test?
The continuity test shows if there is information passing between the lilac wire and other wires with the plate. This test tells you if the pressure switch is sending information to the electronic board.
First, to perform the test you must set your multimeter to the continuity option and then connect the black probe to the purple wire and the red probe to the other wire.
After this process, blow the pressure switch hose to simulate the washer air. If the multimeter beeps, it is because the electronics on this plug is working properly.
Now repeat the first step, but reverse the contact of the test points with the wires. If it makes no noise, it is because the pressure switch is not sending the information to the board.
In addition to the multimeter, there are a number of tools, which are critical to making the technician's job easier and faster.
Summer season puts a lot of strain on the refrigerators. Every food item is kept inside the refrigerator in order to ensure that they remain fresh. Ice is one of the main summer ingredients, and guess where it is prepared? Refrigerators of course, so there is no doubt that refrigerators bear an unusual amount of burden, which is why extra upkeep is necessary. If you are using an appliance quite often, then you will have to understand that the parts and components inside it are generating more heat and thus, being worn off quickly. Therefore, you need to take necessary measures to ensure that the functioning of the appliance remains consistent. In the case of a refrigerator, you need to make sure that it cools as efficiently in summer as in any other season.
Here are some tips to keep your fridge cool during summers.
1. Keep your refrigerator and freezer stocked, reason being, an empty refrigerator will consume more energy compared to a filled one, so make sure you have food stored in the refrigerator and jugs of water in the freezer.
2. Clean Condenser coils because if these are cleaned, then your refrigerator will work more efficiently. To clean these coils, unplug the refrigerator using a brush or vacuum cleaner. Cleaned condenser coils will also reduce your utility bills.
3. Defrost your refrigerator and freezer if there is no automatic defrosting feature available in your refrigerator. Frost build-up lowers the energy efficiency of the unit, so make sure to defrost the fridge if you see ¼-inch of ice forming inside it.
4. You should also check the temperature settings, as it should be between 35 degrees to 40 degrees Fahrenheit. Whereas, the freezer settings should be 0 degrees to 5 degrees Fahrenheit.
5. Also, check the door seals of your refrigerator whether they are airtight or not. Take a piece of paper and place it on the door. Then, shut the door in such a way that half of the paper is visible and half is not. If you are able to pull out the paper easily, then the door seal is weak and needs to be replaced. If you don’t replace the door seal, then the air will keep on escaping from the refrigerator, prompting the unit to use more energy to keep food cold.
6. Keep your refrigerator away from any other appliance that emits heat such as, dishwasher or oven. Also, keep the refrigerator away from windows because sunlight will heat up the unit, thus making the food also warm. As a result, the refrigerator will consume more energy to keep food cold. Also, don’t open the refrigerator too often and for too long.
Follow these tips and you will be able to keep your fridge cool in summer season without a problem.
If your washing machine does not drain water at the end of the cycle, there are several possible reasons behind the problem. The most common is that an object is stuck in the evacuation system, but there could be a number of other reasons as well, so let’s find out some of the most common reasons for the drain function of a washing machine to stop.
1. The drain filter is clogged by an object
2. Drain hose is bent or clogged
3. The drain pump is blocked
4. Solenoid valve does not close properly
5. There is too much foam when draining
6. The belt is broken
7. Water comes back from your pipes
8. The program "stop full tank" is activated
Now that you know the possible reasons behind the inability of a washing machine to drain, let’s move onto the solution part.
The Washing Machine Does Not Drain – The Solution
Check what is blocking the drain system
You won’t believe but a key or pen in the pocket of your trousers can block the drain pump. So, make sure to take out all the items from your clothes before putting them in the washing machine. If the drain is blocked already, then remove that object from the drain pump. Also, remember to unplug the washing machine before operating.
Check the drain hose
The drain hose of the washing machine may also be clogged or twisted. If this is the case, then you will have to put the drain hose back in its right place, but before checking the drainpipe. Again, do not forget to close the water tap and unplug the water supply in order to avoid any risk of electrocution.
Check the lid
Some washing machines do not work when their lid is not properly closed. It must, therefore, be ensured that it is properly closed. In many washing machines, there may be a 3-minute break between cycles as the timer moves forward one-step. Do not advance the timer manually if it stops after the shake cycle, otherwise you may miss the drain cycle. Wait a few minutes.
So, this is how you can fix the draining problem in your washing machine. If the aforementioned steps fail to fix the problem, then you should take the help of washing machine experts instead of trying any other solution because there could be a chance that your washing machine is dealing with some other problem as well.
A home without home appliances is like a car without fuel. You can’t survive a single day if the basic home appliances like your refrigerator, microwave, dishwasher, washing machine, and dryer, etc., are not working. You need to take good care of these appliances in order to ensure that they work smoothly year after year. You must clean them from time to time and especially after parties or other similar occasions where your appliances were used more than usual. Also, when there is a dust storm in your area, you should clean your appliances after the storm to get rid of the dust and dirt accumulated on them. Here is how you can effectively clean a number of your household appliances.
To clean the exterior, dilute some mild detergent in hot water and rub the surface with it. Then, make a mixture of water and vinegar and rinse the surface with this mixture.
To clean the interior of your refrigerator, first take out all the food, cutlery and utensils and set the temperature setting to a minimum. Mix warm water, white vinegar, and lemon, and sprinkle bottom, sides, and plates. Clean with a sponge from top to bottom and wipe with a soft cloth.
To clean the microwave, heat a bowl of lemon juice for 2 minutes at full power and clean the walls with a sponge.
You can also clean your microwave in the same way with a bowl of vinegar water.
Boil for a few minutes a glass of white vinegar with 2/3rd liter of water in a kettle. You can add coarse salt. Leave it all night and the next morning, rinse with water several times.
To descale and degrease, place a large glass of white vinegar on the top of the dishwasher and let it run empty.
Remember to clean the removable parts and the vinegar water filter twice a month before rinsing it.
Pour 1 liter of household vinegar and a glass of coarse salt into the drum and let stand for 1 hour, then run empty with a high-temperature program.
Flip it over and shake it gently to clean crumbs and bits of burnt bread. Use a dry microfiber cloth to clean the rest.
To clean a stainless steel toaster, mix a cup of hot water, 1 soap spoon and a white sugar spoon. Rub with a sponge and dry it. For a white toaster, use baking soda diluted in hot water.
Electric coffee maker
Mix the water and white vinegar evenly and fill the tank with your coffee maker. Run and fill with clear water. Repeat one to two times to rinse thoroughly.
To clean a teapot, rub a lemon on the walls. You can also mix water and baking soda for 1 hour in the teapot before rinsing and drying.
Once used, turn soapy water into your blender (2 drops of dishwashing liquid) and let it run for 30 seconds. Then rinse with clear water.
Empty your freezer and place bowls of boiling water in each compartment to melt the ice. To clean it, mix some white vinegar and lukewarm water.
Moving into a bigger house at a better location is a dream of many, and if you are able to fulfill this dream, then that’s great. But, now, you will have to shift your attention towards transporting the items from your current house to the new one, which is going to be a daunting task, to say the least. The most difficult items to relocate are appliances such as TV, refrigerator, washing machine, dishwasher, and other similar appliances.
If you are scared to move your appliances thinking they would break, then you can go through the five tips to find out how to safely relocate appliances from your existing home to a new one.
Take Measurements Of Your Appliances
The relocation process of your appliances begins with measuring the size of your appliances to be sure if they will fit through the door. If the door is not spacious enough, then you will have to detach it, which is not easy at all. If you have taken the measurements of your appliances and the main door to your new house, then you can arrange something to get the appliances through the door.
Clean The Floors
You shouldn’t overlook the cleaning of floors because if the floors have dirt, stones or foreign objects, then the appliances placed on them will get damaged. Make sure to clean the floors before placing the appliances on it.
Ensure Floor Protection
After making sure that there are no dirt and debris on the floor, you should cover the floor with a protective material such as carpet. You can use an old carpet for the job, which will provide a smooth and safe passage to the appliances. If you don’t have a spare carpet at home, then you can buy temporary flooring.
Preparing The Appliances
Before moving your appliances from one location to another, you need to prep them. For example, if you are relocating the refrigerator, then you need to take everything out of the inside of the refrigerator such as food, utensils, and cutlery. Then, tap or wrap the refrigerator’s door to prevent it from swinging open. Secure the fridge to avoid any damage during the relocation process.
Teamwork Is Required
Even if you feel you are strong enough to carry out the relocation task on your own, be smart and take the help of your family members or a relocation specialist to move your appliances from your existing home to the new one.
With these tips in mind, you can proceed with the relocation process. Outline a plan and work according to it, and you will not find any difficulties in moving your expensive home appliances.
Welcome to our Appliance Repair Blog. We have lots of care, maintenance and troubleshooting tips for all of your appliances!